Home: walls insulated before finishing
Walls lined with reflective insulation and boarded over.




What was needed
Insulating the walls of a ground floor while taking up little thickness.
What was done
Reflective membrane on the walls, sealed joints and plasterboard finish.
How it was installed
- The lining studs are fitted, or the wall where the air cavity will go is prepared.
- The membrane is fitted vertically, floor to ceiling, stapled or fixed to the studs.
- Joints are overlapped and sealed with aluminium tape, taking care around windows, boxes and service penetrations.
- It is closed with board or the finish, leaving the air cavity the system requires.
Guidance installation for façades. Ask us if you want more detail.
More projects
See all projects
4 photosCountry house: walls insulated from the inside
Refurbishment of a country house with SUPER and BLH-B BIG in the wall linings.
FaçadesRefurbishment
4 photosHouse renovation with interior wall lining
Walls of a house insulated between studs before boarding.
FaçadesRefurbishment
4 photosNew building: external walls
New building with reflective insulation in the external walls and the rolls on site.
FaçadesNew build